The EA888 Gen 3 engine found in the Audi TTS Mk3, Audi S3 8V, Seat Leon Cupra Mk3, VW Golf R Mk7 & VW Arteon has proven to be an incredibly capable engine, combined with APR ECU Software these already quick cars are given a radical transformation.
APR’s ECU Upgrades are the best value-per-horsepower modification one can make to the this engine, the upgrades dramatically increase horsepower and torque making for an exceptionally quicker and more exciting vehicle. This is made possibly through APR’s optimisation of the factory engine management system to take full advantage of the engine’s capabilities without needing any end user adjustment. The software loads to the factory ECU through the OBD-II port, resulting in a clean and headache-free install.
APR’s ECU Upgrades are available in multiple stages and torque levels, supporting various octanes both with or without any hardware or transmission modifications. Specific software is available for use with a high flow downpipe exhaust system while all stages are fully compatible with an upgraded intake, intercooler, catback exhaust or other minor bolt on modifications. Finally, each stage is offered with special “Low Torque” software, designed to limit peak torque for use with an unmodified factory manual clutch or DSG transmissions.
APR Stage 1 - 370bhp & 383lbft
APR Stage 1 Software requires no engine hardware modifications but will work with uprated intercoolers, air intakes and cat back exhausts, this package consists of APR Software, installation, data logging and dyno power runs.
Price £760 inc VAT
APR Stage 2 - 387bhp & 409lbft
APR Stage 2 Software requires an uprated air intake, intercooler and turbo downpipe, this package consists of APR Software, installation, data logging and dyno power runs.
Price £880 inc VAT
(Upgrade From APR Stage 1 to Stage 2 £120 inc VAT)
Important Note: These figures are based on the 98RON High Torque versions of APR's software, manual cars will require an uprated clutch, DSG vehicles will require APR's TCU Software to avoid clutch slip issues.
CALL US TODAY
|(Lines Open Mon-Fri 9:00 - 17:30)|
APR Stage 2 Packages
We've put together two Stage 2 Packages based on APR's Stage 2 Software, these packages do not include any transmission upgrades, DSG vehicles will require APR's TCU Software, manual vehicles will require an uprated clutch, you can find more information about transmission upgrades below.
Stage 2 Package A
our first package is all about the APR Hardware and includes the APR Cast Downpipe, APR Carbon Fibre Intake System, APR Intercooler, APR's Stage 2 Software and Labour.
Price £3699 inc VAT
Stage 2 Package B
Our second package is based on APR Stage 2 Software and includes a Milltek Sport Decat Downpipe, Racingline R600 Intake Kit, Airtec Intercooler and Labour.
Price £2799 inc VAT
The Stage 2 Packages require transmission upgrades to avoid clutch clip, DSG vehicles will require APR's TCU Software and manual vehicles will require an uprated clutch.
APR TCU Software
APR’s TCU Software goes beyond the overly simplistic norm of raising a few limiters and offers a wide range of changes designed to enhance the driving experience especially when combined with APR’s Performance Engine Software and Hardware and is strongly recommended for those who wish to run APR's High Torque ECU Software.
DQ250 6 Speed Price £665 inc VAT
DQ381 7 Speed Price £792 inc VAT
Sachs Performance Clutch & Flywheel Kit
For manual vehicles we're able to supply and fit a Sachs Performance Clutch & Flywheel Kit, this is rated to 450lbft and converts from a dual mass to a single mass flywheel, the price includes labour.
Price £1849 inc VAT
Improving engine performance is one thing but being able to stop is much more important, we have some fantastic stopping power upgrades from well known manufacturers such as Alcon and Stoptech, you'll find these products on our site and we offer full fitting services at our workshop.
We offer suspension upgrades from a wide range of manufacturers including Bilstein, Eibach and Nitron, we're also the only KW Performance Partner in South Wales and the West, we don't just sell high end suspension, we offer installation, geo setup and corner weighting to ensure you're getting the very best out of your upgrades.
We offer a wide range of exhausts upgrades from well known manufacturers such as Akrapovic, Milltek Sport, Cobra and Scorpion, we offer free fitting on Milltek Catback Exhausts that are purchased at full RRP, contact us for more information.